+420 499 599 800 (po-pá, 8:00 - 17:00)

Primergy RX2510 M2 4x3,5"/1U/E5-2620v4 8C/16T/8GB/noHDD/RAID 0,1/2xGL/450W/SYM

AB Kód: 1333856

Vyobrazení produktu je pouze informativní a není závazné.

Toto zboží nadále není možné koupit. Prohlédněte si podobné produkty zde.
Záruka: 36 měsíců
PRIMERGY RX2510 M2 Base unit PRIMERGY RX2510 M2 Housing types Rack Storage drive architecture 4 HDD Power supply Hot-plug Product Type Dual Socket Rack Server Mainboard Mainboard type D3279-H Chipset Intel® C612 Processor quantity and type 1 -
Popis produktu

PRIMERGY RX2510 M2 Base unit PRIMERGY RX2510 M2 Housing types Rack Storage drive architecture 4 HDD Power supply Hot-plug Product Type Dual Socket Rack Server

Mainboard Mainboard type D3279-H Chipset Intel® C612 Processor quantity and type 1 – 2 x Intel® Xeon® processor E5–2600 v4 product family-based platform Processor Intel® Xeon® processor E5–2620v4 (8C/16T) Memory slots 12 (6 DIMMs per CPU, 2 channels with 3 slots per channel) Memory slot type DIMM (DDR4) Memory capacity (min. – max.) 8 GB – 384 GB

Interfaces USB 2.0 ports 1 x USB 2.0 (1× rear) USB 3.0 ports 4 x USB 3.0 (2× front, 2× rear) Graphics (15-pin) 1 x VGA (1× rear) Serial 1 (9-pin) 1 x configurable as COM1 or Server Management COM interface (1× rear) Management LAN (RJ45) 1 x dedicated management LAN port for iRMC S4 (10/100/1000 Mbit/s) Data Sheet FUJITSU Server PRIMERGY RX2510 M2 Dual socket 1U rack server Page 4 / 9 www.fujitsu.com/…ck/rx2510m2/ Onboard or integrated Controller RAID controller All hardware storage controller options are described under Components SATA Controller Intel® C612 LAN Controller Intel® C612. LAN controller are integrated in optional I/O units, details are described under I/O options. All supported features are described in relevant system configurator. Remote management controller Integrated Remote Management Controller (iRMC S4, 8 MB attached memory incl. graphics controller), IPMI 2.0, DCMI 1.5, SNMP 2.0, REST API 1.0 compatible Onboard controller notes Onboard 4× S-ATA 6Gbit/s RAID Controller (RAID 0,1) for up to 4× S-ATA drives available

Slots PCI-Express 3.0 x8 2 x Low profile PCI-Express 3.0 x16 2 x Low profile (2nd CPU required for slot 4) Slot Notes Slot 1 (internal): PCIe Gen3 x8 @CPU1 is dedicated for the modular RAID Controller. Slot 2: PCIe Gen3 x8 @CPU1 for low profile cards with up to 167mm length Slot 3: PCIe Gen3 x16 @CPU1 for low profile cards with up to 167mm length Slot 4 standard: PCIe Gen3 x16 @CPU2 for low profile cards with up to 167mm length Slot 4 option: PCIe Gen3 x16 @CPU2 for full height cards with up to 167mm length (!in this case, slot 3 is not available) Drive bays (Base unit specific) Storage drive bays optional up to 4 × 3.5-inch (2.5-inch drives will be mounted into 3.5-inch drive cages)

Dimensions / Weight Rack (W x D x H) 483 mm (Bezel) / 435mm (Body) x 770.7 × 43 mm Mounting Depth Rack 748.2 mm Height Unit Rack 1 U

Dimensions / Weight 19” rackmount Yes Mounting Cable depth rack 200 mm (1,000 mm Rack recommended) Weight up to 16 kg Weight notes Actual weight may vary depending on configuration

Environment Operating ambient temperature 5 – 40 °C (41 – 104 °F) Operating temperature note Cool-safe® Advanced Thermal Design (above 35 °C or below 10 °C) depending on configuration. For detailed information see relevant system configurator. Operating relative humidity 10 – 85 % (non condensing) Operating environment FTS 04230 – Guideline for Data Center (installation specification) Operating environment link http://docs.ts.fujitsu.com/dl.aspx?… Noise emission Measured according to ISO 7779 and declared according to ISO 9296 Sound pressure (LpAm) Noise minimum configuration: <31 dB(A) (idle) / <34 dB(A) (operating) Noise typical configuration: <31 dB(A) (idle) / <36 dB(A) (operating) Sound power (LWAd; 1B = 10dB) Noise minimum configuration: <4.7 B (idle) / <4.8 B (operating) Noise typical configuration: <5.0 B (idle) / <5.2 B (operating) Noise notes Noise emissions depends on operation modes, system configuration and ambient temperature. Operating mode measured based on OLTIS with 50% load. *OLTIS = FUJITSU Load Profile which stresses all components of a server with a given load level. Electrical values Power supply configuration 1+1 hot-plug power supply Hot-plug power supply redundancy Optional Active power (max. configuration) 510 W Apparent power (max. configuration) 515 VA Heat emission (max. configuration) 1836.0 kJ/h (1740.2 BTU/h) Rated current max. 4.0 A (100 V) / 2.0 A (240 V) Active power note To estimate the power consumption of different configurations use the Power Calculator of the System Architect: http://configurator.ts.fujitsu.com/public/ Power supply 450W hot-plug, 94% (Platinum efficiency), 100–240V, 50 / 60Hz 800W hot-plug, 94% (Platinum efficiency), 100–240V, 50 / 60Hz

Potřebujete poradit s tímto produktem?
Valerie Lonerová vám ráda pomůže.
V pracovní dny 8:00 - 17:00 volejte 499 599 800
Kdykoliv napište na info@ab-com.cz
Základní parametry
Značka:
Kód výrobce:
VFY:R2512SC010IN
EAN:
4057185608190
AB kód:
1333856
Základní vlastnosti
Distribuce
EU
Hmotnost
700 g
Potřebujete poradit s tímto produktem?
Valerie Lonerová vám ráda pomůže.
V pracovní dny 8:00 - 17:00 volejte 499 599 800
Kdykoliv napište na info@ab-com.cz
Produkt se nachází v kategoriích