DVI dual link extender pro konzoli s USB klávesnicí a myší, vzdálenost
až 60 metrů přes Cat. 5 STP/FTP, ochrana proti přepětí, úchyty do
19" racku
The CE602 is a DVI Dual Link and USB based KVM Extender with RS-232 serial
functionality. It allows access to a computer system from a remote console (USB
keyboard, monitor, and mouse). Because it allows access to a computer system
from a remote console, the CE602 is perfect for use in any type of installation
where you need to place the console where it is conveniently accessible, but you
want the system equipment to reside in a safe location – away from the dust
and dirt of the factory floor, or the harsh environmental influence of a
construction site, for example. This allows users to deploy system equipment
over large distances.
The CE602 can support up to 2560 × 1600 (DVI Dual Link) resolution. It
uses two Cat 5e cables for HDCP, RS-232, microphone and dual link signals. You
can also use just one Cat 5e cable if using single link connections.
Local and Remote Units connect at distances up to 60 m using Cat 5e cable
Allows access to a computer or KVM installation from a remote console (up to
60 m) Supports DVI-D interface and allows transmission of DVI duallink signals
Features ATEN technology that allows A/V transmission over one cat 5e cable The
2nd Cat 5e cable is used for HDCP, RS-232, microphone and dual link signals
Manual compensation control to adjust signal strength in order to compensate for
distance RS-232 serial ports – connect to a serial terminal, or serial
devices such as touchscreens and barcode scanners (Baud Rate 115200 bps) Audio
Enabled – supports stereo speakers and microphone Built-in 8KV/15KV ESD
protection (Contact voltage 8KV; Air voltage 15KV) Supports Wide Screen formats
Superior video quality of up to 2560 × 1600 @ 60 Hz (DVI Dual Link) at
40 m; 1920 × 1200 @ 60 Hz at 30 m; 1024 × 768 @ 60 Hz at 60 m –
get an excellent, crisp image on your screen over long distance transmissions
Hot pluggable Rack mountable Easy to install – no software required –
connecting cables to the devices is all it takes Firmware upgrade
Package Contents 1× CE602L DVI KVM Extender (Local Unit) 1× CE602R DVI KVM
Extender (Remote Unit) 1× 1.8 m USB DVI-D Dual Link KVM Cable Set 2× Power
Adapters 1× Mounting Kit 1× User Instructions
